How to Install Android 4.4.2 Firmware for Galaxy Note Pro 12.2 SM0P905 Guide ~ Download custom rom android

P905XXUANAF Android 4.4.2 KitKat Firmware Last Updated on 5-Feb-2014. Download and install the XXUANAF 4.4.2 KitKat Stock Firmware on Samsung Galaxy Note Pro 12.2 SM-P905 tablet. Samsung recently started rolling out an OTA update about the firmware. The firmware is also available for download for manual update. The Galaxy Note Pro 12.2 recently announced by Samsung with Android 4.4 KitKat and this is the first official Android 4.4.2 KitKat firmware update for the device. If you own the device and not yet updated this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and install the P905XXUANAF 4.4.2 KitKat firmware manually through Odin.

As the Galaxy Note Pro 12.2 P905 released with the Android 4.4 KitKat, you can expect few bug fixes and performance enhancement with this latest update. It is always recommended to update your device to the latest available firmware to keep updated with the latest security changes.

So, want to update your Galaxy Note Pro 12.2 P905 to the latest XXUANAF Android 4.4.2 KitKat firmware? To install in official way, you can either go for OTA (over the air) from Settings-About Tablet-Software Update or download and install the firmware through the Samsung Kies utility. However, if prefer a manual way to update official firmware, then follow this article to find step by step manual guide to update the latest Android 4.4.2 XXUANAF firmware on your Galaxy Note Pro 12.2 P905 through Odin.

Important Note:

"The firmware is released only for the Samsung Galaxy Note Pro 12.2 SM-P905 model, so don’t try this in any other android device. Check your device model number from Settings-About Tablet. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your Tablet".

Android 4.4.2 KitKat P905XXUANAF Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Note Pro 12.2 SM-P905 model.

Singapore: P905XXUANAF_P905OLBANA9_XSP.zip
Singapore (Singtel): P905XXUANAF_P905OLBANA9_SIN.zip
Singapore (StarHub): P905XXUANAF_P905OLBANA9_STH.zip
Singapore: P905XXUANAF_P905OLBANA9_MM1.zip

[Firmware for rest of the countries will be update here when available]

Pre-Requisites:

Check battery percentage, your device should have at least 90% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.4.2 P905XXUANAF official firmware on Galaxy Note Pro 12.2 P905.

How to Install Android 4.4.2 KitKat Official Firmware on Galaxy Note Pro 12.2 P905 through Odin:

Download Android 4.4.2 XXUANAF Firmware for Galaxy Note Pro 12.2 P905 from the above list
Download Odin 3.07
Switch off your Tablet and boot Galaxy Note Pro 12.2 P905 into Download Mode by pressing and holding the Volume Down and Power keys together until you get the warning message, now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Note Pro 12.2 P905 to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin screen, click on PDA button (if you are using the latest Odin Version, then click on AP button instead of PDA) and select the firmware file with .tar.md5 extension (The firmware file look something like: P905XXDLJ5_P905ODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your Tablet should automatically reboot after completion
You can now disconnect your Tablet from computer
Finish

That’s all to update Android 4.4.2 KitKat official firmware on Galaxy Note Pro 12.2 SM-P905. Hope you get all the above points and successfully completed the tutorial. If you followed everything as mentioned in the above tutorial, then your Galaxy Note Pro 12.2 P905 should now running on the latest Android 4.4.2 KitKat build version XXUANAF. You can verify the firmware update details from Settings-About Tablet. If you have any query or problem with download link, feel free to contact with us and don’t forget to share your experience in the comment below.